In the photos (click to enlarge), I fiddled with a few seams 5-10mm here and there on draft and made the adjustments to the left leg only to get a better silhouette, before the model became bored. So, the left leg is what I'm working from. I also did a very bad job of pressing the seam at the hip (got distracted by something else), and stretched and scorched the cloth. It wasn't wobbly at the pocket area before that happened.
Back, side, front:
The rear is still slightly knock-kneed and pulling. It is my intention to let out 10mm at the inside knee back panel, graded along the red line. There is some bulk at the lower back which I will take in, and the seat is too tight and is causing the rear to hang badly, so I will loosen it as marked. The very front of the crotch isn't great and I'm tempted to go in 5mm there too.
Any other ideas? She wants something that minimises the width of her hips with a shirt tucked-in, so I'm trying to do reasonably slim legs. The real cloth won't arrive for a couple of months, so I won't be able to post the finished product this year; sorry.
Edited by rs232, 13 November 2010 - 08:23 AM.